[Unbound-users] Requestlist filling ? automatic cleanup ?
wouter at NLnetLabs.nl
Sun Mar 20 22:16:35 UTC 2011
-----BEGIN PGP SIGNED MESSAGE-----
On 03/20/2011 10:53 PM, Thomas wrote:
> Hi Wouter,
> Excellent explanations and fast reply as usual, many thanks.
>> (W)hat version are you using? Recently the timeout code was changed to
>> cope with this sort of situation (1.4.7):
> Oops sorry. I forgot to tell but I am using the latest : 1.4.8.
Good to know. It has newer time code that should minimise the impact of
the event you report.
> It's running on Centos 5.5 (old 2.6.18 kernel sadly). We built our own
> packages. And it should have libevent. I created a thread a while ago
> about where I wanted an explicit way to be sure that we have and are
> using libevent. And you told me that I was using it IIRC :)
> uptime: 2773636 seconds
One month uptime, nice :-)
Ok you are using libevent, so you can increase your requestlist size
(significantly) above 300.
>>> [..] jostle-timeout is triggered when the server is very busy. What
>>> 'busy' ?
>> The requestlist is full.
> Ok. I think this should be clarified in the documentation, I can send
> you a patch if you want to save your time.
Yes please, I do not know where to make the edit.
>> Your requestlist is the default, so about 1000 and 300 does not fill it
>> up. I would recommend a recompile with libevent because of your
>> somewhat high load (then you can increase the requestlist and range to
>> several thousand, and in recent versions the default increases by
>> itself, http://www.unbound.net/documentation/howto_optimise.html )
> I read this document many times since I am using unbound (and I will
> read it again;). But what parameter defines the requestlist size or
> actually influence on it.
num-queries-per-thread: the requestlist size
outgoing-range: number of sockets
So, with libevent, you can set the num-queries-per-thread to, say, 4096.
And you can set the socketcount, outgoing-range, to, say, 8192.
It would allow unbound to open 8192 network connections (ports).
It would allow unbound to service 4096 queries that are not answered
directly from cache, of which 2048 are run-to-completion and 2048 are
the fast-stuff list (that are removed to make space for newer queries).
>>> [..]. Could that impact unbound reactivity ?
>> No, other queries that priority over these older queries.
You can see in the statistics (if you use the munin plugin, or cacti, or
another monitoring system), if unbound jostled or dropped packets.
>> The requestlist is divided into two halves: run-to-completion, and
>> fast-stuff. The run-to-completion is that. The fast stuff deletes
>> older queries to make room for new queries (but not unless the
>> jostle-timeout has expired, otherwise you could deleted everything that
>> comes in immediately under a DoS).
> Thanks for the explanation. Is this written somewhere as well in the
> docos ?
The man pages explains the settings under the jostle heading, but that
is a config help, not an operations manual.
>>> Note: jostle-timeout is still set to the default (see my config below).
>> Yes that should be OK. If you lower it, it will be more likely to drop
>> the groupinfra stuff.
> Ok. I may have some questions about that but I will read the doco first
> about jostle-timeout.
The idea is that older queries are removed to make space for newer
queries. But under a DoS we must not remove everything all the time, we
want it to be able to do one 'quantum' of work. That is, make a UDP
request upstream and get an answer. This is the jostle-timeout: about
an average UDP ping. For queries that need multiple UDP packets,
intermediate results would get stored in the cache, so this way the
queries make progress towards answering clients.
If you are usually on low-ping, you could lower the value.
If you are usually on a higher ping (i.e. Australia), a higher value
might more accurately represent the 'one useful action'.
The default is 200 msec so will often make (somewhat local) queries work
under a DoS.
This is all explanations for the audience, in this case the groupinfra
stuff is hours old, and thus would get dropped right away if there were
to be a resource problem.
>>> I am asking that because sometimes our unbounds have a random hiccup and
>>> I am wondering if it could be due to this or not. The 'hiccup' is very
>>> hard to debug because it's random (once a month or so) on servers doing
>>> something like 500 to 1500 qps each so increasing the verbosity from 1
>>> to 2 is not really possible :)
> Ok, so I think I will have to do a script to increase verbosity when it
> seems that unbound can't resolve anymore and hopefully I will be able to
> catch this nasty issue (could be network related).
What would be more interesting is a unbound-control lookup
groupinfra.com This lists the nameservers, the TTLs and so on.
>> What seems to happen is groupinfra has a lot of servers. And they
>> sometimes experience outages. When they experience an outage, unbound
>> gets timeouts and tries to fetch the names, but also the other
>> nameserver names (and there are a lot of them). Given user demand for
>> groupinfra, unbound starts to explore all the nameservers for
>> groupinfra, with timeouts and thus the entries fill up your requestlist.
>> The dependency structure is like that log excerpt that you show.
>> Because the thing has timeouts those entries are necessarily pretty old,
>> and thus (the ones in the fast-stuff list) would be dropped to make room
>> for new queries (if there was a lack of space, but there is no lack of
>> space, so these queries are performed: there is interest and there is
>> capacity to undertake actions to find the answers).
> Yep ok, I understand but still it is weird to see unbound trying to
> resolve something for almost forever. For instance 143000 secs aka 39
> hours :) But we have resources so maybe one day it will work (I reckon
> this domain just never works ;).
Yes it is exactly that. There are resources, unbound thinks that
(potentially) an answer might come back, and thus 'probes' these
servers. You could blacklist the 10.0.0.0/8 in the
do-not-query-address: config, (if you do not use those yourself), as
groupinfra.com advertises that it uses a lot of servers from there, and
they'll never respond.
> 252 AAAA IN uk-dc007.groupinfra.com. 142994.571268 iterator wants AAAA
> IN au-dc012.groupinfra.com. AAAA IN br-dc003.groupinfra.com. AAAA IN
> de-dc008.groupinfra.com. AAAA IN my-dc003.groupinfra.com. AAAA IN
> nl-dc006.groupinfra.com. AAAA IN ph-dc001.groupinfra.com.
Yes that is indeed a very long time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
-----END PGP SIGNATURE-----
More information about the Unbound-users