[nsd-users] NSD not reachable over IPv6 without ip-address option

[Anand Buddhdev]

Hi Pim,

This issue comes up quite frequently.

If you don't configure NSD to bind to a specific IPv6 address, then when 
it is constructing a DNS response packet, it doesn't set the source 
address in it. It passes the packet to the OS, which then selects a 
route for the packet, and sets the source address appropriate for that 
route. If you have multiple interfaces on the server, or multiple IPv6 
addresses on an interface, then the OS can pick the wrong one, and the 
client will receive a DNS reply from an address it wasn't expecting, and 
probably discard it.

It is good practice to make your NSD server bind explicitly to the 
addresses that it's supposed to listen to and reply from.

Regards,
Anand

On 06/01/2023 18:41, Pim Kunis via nsd-users wrote:
> Hi,
> 
> I have a dual-stack IPv4/IPv6 server on which I run NSD. However, 
> without adding the "ip-address" option in nsd.conf, NSD does not respond 
> to IPv6 queries. It does respond to IPv4 queries. Also, it does respond 
> to requests from the same machine to ::1.
> 
> Below you can see that the NSD is indeed listening to UDP port 53 on 
> IPv6 on the wildcard address:
> 
>> root at lewis:/etc/nsd# ss -ulpn sport inet6:53
>> State                 Recv-Q Send-Q Local 
>> Address:Port                                 Peer 
>> Address:Port                Process
>> UNCONN                0 0 [::]:53 [::]:* users:(("nsd: server 
>> 4",pid=16052,fd=4),("nsd: server 3",pid=16051,fd=4),("nsd: server 
>> 2",pid=16050,fd=4),("nsd: server 1",pid=16049,fd=4),("nsd: 
>> main",pid=16048,fd=4),("nsd: xfrd",pid=16046,fd=4))
> 
> Does anybody know what could be the problem?
> 
> Kind regards,
> 
> Pim Kunis